When used in conjunction with our included new 76 + page Colloidal Production Guide and and by using our lab tested and proven methods, you or your lab technicians will be able to accurately produce many types of nano particulate colloidal solutions.

The DIGIPRO NST™ system is the key and center device to help colloidal producers makes Nanoscopic charged HVAC colloidal solutions using our safe and effective HVAC TSM method. Make pure and pristine NanoSilver, NanoCopper, NanoZinc, NanoPlatinum, NanoPalladium and other futuristic precious minerals for human Nutritional Supplement, Topical Solutions, Bandages, Medical procedures, etc.

This DIGIPRO NST™  happens to be the ONLY device that will make proper and accurate NanoGold in the clear, pink and red hued color ranges.

Why our NST's are better than other cheap transformer solutions

Ionic LVDC systems cannot produce NanoGold solutions or any Nano Particles for that matter,

so wimpy wall transformers won't work.

Gold feeding machines using low voltage DC or AC 'welding methods'

are overkill and just waste your gold electrodes. They make 'chunky style gold' that is never in the nano particulate range.

In fact, pretty red or purple gold always is indicative of a huge particle size that could be potentially toxic to the human who would partake of it.

The NST-120 comes standard to operate at full output power for a wide range of stabilized and not-so stabilized power grids in the 105-145 VAC 50/60 hz ranges. The NST-220 model covers 205-277 VAC 50/60 hz input and is a special order (direct from the USA factory) for an additional cost.

Both units are actually Made in the USA and carry an original 1 year manufacture warranty.

NST-120 and NST-220 Specification and Facts

• Approved and Laboratory tested to make TSM or PUAM ARC method Colloidal Nano (non-ionic) HVAC Silver, Copper, Gold, Electrum (Sil/Gold mix) Zinc, Magnesium, Platinum, Palladium and Iridium as well as other futuristic colloidal nano liquids and health supplements. *Systems only come with Silver and Copper Electrodes, all other electrodes are optional.

• Computer Controlled Auto Sensing voltage & current Inputs and outputs (senses your colloidal load requirements 120 times per second)

• GFII auto shock, shutdown module is also controlled by the on-board computer module.

• LED Computer controlled Diagnostic Modes, with readout LED blinking light codes

• Comes with thick, 14 gauge 15 amp 30" heavy-grade grade power cord with the IEC 3 prong (America) grounded plug (International grounded plug adapters for use on your Countries local grid are usually included free with any packaged NST-220 priced system)

• The NST-120 and NST-220 both sport a 15,000 VAC @ 30 solid milliamps output under full power.

• Smart auto-sensing brings most colloidal batches down to a safer 7.5 kv range at about 1 milliamp when necessary to make the smallest <10 nm colloidal bio-efficient particle. Making a Colloidal Batch safer for producers and more ECO-FRIENDLY by using the NST-120 or 220.

• NST-120 or NST-220 is designed to make a single 32 oz (1000 ml) batch and normally takes around per 60-90 minutes of production time with up to 4 batches if safety measures, proper accessories are used and adhered to.

• You decide on the potencies your production needs by extending brewing times to match your own needed results. There are no timers or auto-shut off circuits to interfere with your complete colloidal production setup. Our included Lab Tested methods and timing charts are designed around the 10 ppm u/s limits however.

• COMMERCIAL GRADE: Both the DIGIPRO NST™  120 and 220 has enough power to run 4 full simultaneous of 32 oz (1000 ml) batches (with proper set-up and optional electrodes, QPC's and HV leadsets). We do recommend that you only make 1 single batch to be safe. Some adventurous lab technicians have used the DIGIPRO NST™  system to effectively chain up to ten 1000 ml batches of NanoSilver per brew period, per unit. All NST's run warm, but safely while being chained.

•  The DIGIPRO NST™  system is a GREEN system because even under a full load of multiple batches, the The DIGIPRO NST™  only draws about 1/2 an amp under full batch progression and even if chained up to 4 simultaneous batches, your NST will only draw a total of 3 amps (or around 350 watts) making the NST a VERY EFFICIENT Colloidal Lab power supply. Similar MOT's (microwave oven transformers) are not safe or even close to this efficiency and are of course not UL Listed or approved for lab uses. MOT's also require 1500 watts to use, making them a dangerous alternative to the lab approved NST versions.

• All DIGIPRO NST™  are 100% Made in America and carry a full UL Certification when installed properly.

• All NST Systems include a full quick start guide, with LED Computer Diagnostic codes.

• SPECIAL ORDER ULTRA HIGH POWER 60 ma SYSTEMS are available for $125.00 extra

• ALL NST-120 Units are IN STOCK and READY FOR DELIVERY within about 7-10 days. ALL NST-220 Units are special order and non refundable and take about 7-14 days delivery before we can outfit and burn them in. They will be packed well and shipped as soon as possible. ALL NST models have been approved for INTERNATIONAL USES, we have over a hundred units in place all over the world. Since we started selling them 10 years ago, NOT A SINGLE NST (International or US) unit has EVER FAILED and needed to be returned to the factory. These units run well forever or so it seems. They are built like a 35 pound brick of power!

• Our special NST Systems are not simply solid state ballasts, or sign channel units, the NST's are real, thick gauge winded transformers with digital module controllers that can handle most dead shorts like a champ and still keep working after being reset. Real NST's weigh 25 pounds and up. If your "NST" you are buying off of EBAY weighs under 10 pounds, they are the cheaper, solid state cascade designs and will fail on the first heavy colloidal experiment. Real NST's are ONLY PRODUCED and SOLD in the USA, they are not available in any other Country unless it was previously bought and shipped over to your Country. ALL NST's can be exported without any customs problems all over the world.

• In discussing our results above; in regards to using our NST systems; all Colloidal Mineral tests, Laboratory Analysis and Data remain the property of Organix Labs. Lab Analyses and Testing of your final product is up to you and your company, once you get your own NST Colloidal Production System going. We teach you in our included book of how to run a weeklong period of baseline testing of your batches and have them independently sampled for your particular uses. We do not offer assistance to provide you any certified results just by using this equipment. If you are going to use any DIGIPRO Colloidal Production System for commercial uses, we suggest that you go through the proper product testing and obtain your own lab results and certifications, if required in your area. We cannot share our results, certificates, lab assays, bio-efficiency test results with you or your company as this information is proprietary and licensed information. Our results or certifications are not for sale and should not be used as marketing or promotional uses by your company, just because you are using our methods and/or equipment. For some System Owners, we do offer free basic lab analysis, so please ask us.